Create quality with science and technology, enrich life with intelligence
Create quality with science and technology, enrich life with intelligence
The purpose of using casters is to reduce labor intensity and improve work efficiency. Choose the right caster according to the application method, conditions and requirements (convenience, labor saving, durability). The following points should be considered:
1. Caster style (hole structure, tread and bracket material)
2. Wheel diameter D size (1 inch = 25.4mm)
3. Brake structure: Usually casters are used in two ways
4. Load: Although the number of casters is usually greater than or equal to 4, when calculating the actual effective load of the caster, only the total load of the three wheels can be calculated. That is: (single wheel load × 3 ≥ required load.
5. Moving speed: Under normal temperature, on a flat ground, not higher than 4KM/H, and there is a certain working state of stopping.
Analysis of common problems of casters
Unable to move: Is there an obstacle blocking it, is there an object wrapped around the wheel bearing, and is the wheel intact;
Difficult to turn: 1. If it is placed for too long and the lubrication is insufficient, lubricating oil can be regularly injected into the rotating position to prevent rust: 2 Overweight: Choose a suitable caster according to the load-bearing capacity.
